Seal / Sigil energized with electricity

[Magicat]

I'm familiar with imaginal energization. Curious if there's any way to put a DC current into a seal, for example of Archangel Rafael. Would I just draw the sigil with conductive ink, then attach alligator clips from a 9V?

 

[Morell]

Electricity and connected chemistry is not my cup of tea, honestly. However I don't think that this would be whatsoever effective. Electricity itself I would consider pretty raw. I can't imagine how putting a sigil into a circuit, just like that, could activate it, because electricity would only move through entire circuit. It would just physically cause battery to discharge and for sigil to be a part of electromagnetic state that disappears when you turn it off.

However I can imagine using electricity on charging a sigil in a way of covering the sigil in some electrolytic material that could be "crystalized" on sigil using electric circuit. Especially if you use cut out sigil from one metal and cover it with another using electricity. That would bring visible change, which when combined with your focused intent could make quite interesting sigil activation.

Similar effect could be a sigil made from material that doesn't dissolve in water, bathing in water with salt or copper sulfate and meditating over it while it gets covered in crystals. Crystals forming with such intent and charged with energy can be part of quite interesting sigil. The slow process and the crystal growth sounds fascinating even to me when thinking about it...

ut in all honesty, I do not think that electricity can replace spiritual energy created by your own focus and intent, as that energy comes into sigil already carrying a purpose, which electricity lacks. It is also purely or mostly physical, while spiritual energy is not...

 

[Yazata]

I'm familiar with imaginal energization. Curious if there's any way to put a DC current into a seal, for example of Archangel Rafael. Would I just draw the sigil with conductive ink, then attach alligator clips from a 9V?

I've only been reading a bit about radionics recently (though it's something I wanted to get into a long time a go already..) but I think this is a way to do it. Maybe attach the seal to, or in some way engrave it on, a plate of copper?

 

[FraterFraxinus]

Custom made PCB's in sigil form sound like a cool idea. Hook up an arduino and make the PCB run a Ritual when connected.
Technomancie at it's finest.
Probably already is done when i think of some microscopic gimmicks hidden on some PCBs.
Just test your idea and post the results. Worst thing that can happen is that nothing happens but you still mightve learned something.

 

[Magicat]

I've only been reading a bit about radionics recently (though it's something I wanted to get into a long time a go already..) but I think this is a way to do it. Maybe attach the seal to, or in some way engrave it on, a plate of copper?

I have gone through several radionics boxes from KRT to SE5K to Mulder's Wish Boxes to self-made Cosamino rigs. The last arethe best as my intent is baked into the circuit during the build and I really ever made them for one single intention. KRT & SE5K were never really used for analysis so that medical angle went unchecked. The wish boxes were cool but really "skanky" compared to the high end boxes. One arrived reeking of cigarettes. However the WB's can be easily set up & run. I've had some interesting experiences. One I made seemed to influence light patterns falling into my apartment from across the street, to display a particular internal "xray" of my mother's knees, which is what I'd created the box for. Seeing that on the wall blew my mind. Think of the deLaWarr cameras, but this happened in realtime on my apartment door. Sadly I couldn't capture it on camera because the image was too low lux to register on my CCD. Anyhow can't really say if they work. I gave it my best but never saw a concrete result despite the interesting phenomenon.

Post automatically merged: Today at 6:22 AM

Electricity and connected chemistry is not my cup of tea, honestly. However I don't think that this would be whatsoever effective. Electricity itself I would consider pretty raw. I can't imagine how putting a sigil into a circuit, just like that, could activate it, because electricity would only move through entire circuit. It would just physically cause battery to discharge and for sigil to be a part of electromagnetic state that disappears when you turn it off.

However I can imagine using electricity on charging a sigil in a way of covering the sigil in some electrolytic material that could be "crystalized" on sigil using electric circuit. Especially if you use cut out sigil from one metal and cover it with another using electricity. That would bring visible change, which when combined with your focused intent could make quite interesting sigil activation.

Similar effect could be a sigil made from material that doesn't dissolve in water, bathing in water with salt or copper sulfate and meditating over it while it gets covered in crystals. Crystals forming with such intent and charged with energy can be part of quite interesting sigil. The slow process and the crystal growth sounds fascinating even to me when thinking about it...

ut in all honesty, I do not think that electricity can replace spiritual energy created by your own focus and intent, as that energy comes into sigil already carrying a purpose, which electricity lacks. It is also purely or mostly physical, while spiritual energy is not...

You've hit on interesting ideas. I'd like to try them though I'm unsure of how. Can you possibly point to youtubes that describe the methodology of your ideas?

Post automatically merged: Today at 6:34 AM

Custom made PCB's in sigil form sound like a cool idea. Hook up an arduino and make the PCB run a Ritual when connected.
Technomancie at it's finest.
Probably already is done when i think of some microscopic gimmicks hidden on some PCBs.
Just test your idea and post the results. Worst thing that can happen is that nothing happens but you still mightve learned something.

This sounds like a neat idea but is unfeasible. Each PCB costs a ton before shipping & may incur tariffs depending shipping country. I do have a ton of copper wire however. What can an arduino do in this case? I'm a complete newb w/that.

I got this idea from The Laundry Files series by Charles Stross. He constantly talks technomancy, with laser pentagrams, orbital platforms to raise Elder Gods, ritual packets injected into AT&T and Comcast lines across the country, etc. etc. Just amazing font of ideas in the books.

 

[Morell]

You've hit on interesting ideas. I'd like to try them though I'm unsure of how. Can you possibly point to youtubes that describe the methodology of your ideas?

Of course. these will give you idea on how to do that...
You can use salt instead of copper sulfate. I just love that blue color... but keep in mind that it is not to be licked or anything. Salt is much safer in that matter, will just form different crystal shape. Say safe.

Post automatically merged: Today at 7:42 AM

Guess that I described electroforming wrong, Apologies for that...

 

[Reynard]

I'm a chaote, so I like to improvise and experiment. Love the idea of charging sigils with electricity. I created a servitor for good health and protection, and its base is my phone. I have its sigil on my lock screen, and every time I charge my phone, it charges the sigil.

(I can't take the credit for this - I got the idea from someone on this forum, or maybe on Reddit, who did something similar.)